Wheel Balancer 4 Cones System Set - Range: 1.75" - 5.25" (Bore Size: 28mm)

Wheel Balancer 4 Cones System set - Range: 1.75" - 5.25"

Includes:

Bore size - 28MM - 36MM - & - 40MM

Kit # - 2415-28 - 2415-36 - & - 2415-40

Range - Individual Part Numbers

1.75"-2.75" Cone - 2410 - 8476-36 - & - 8476-40

2.44"-3.06" Cone - 2411 - 8253-36 - & - 8253-40

2.95"-3.63" Cone - 2412 - 8252-36 - & - 8252-40

3.375"-5.25" Cone - 2095-28 - 2095-36 - & - 2095-40

Spring - 8820 - 8825 - & - 8825

Fits the following wheel balancer brands:

Fits: Hunter, Coats, Sunrise, Nationwide, Ranger, Ammco, Hoffman, Corghi, Cemb, K&L And many more. (Shaft size may vary per machine)

28mm Shaft Models -

Accuturn - 5100, 5223, 5500, 5600 (Serial #51-0001 To 51-0622)

Coats - 700, 800, 825, 850, 925, 950, 1000. 1025, 1050 And 1250 IBS2000 (Shaft Must Be Verified 28mm) And 6200HS

Mondolfo Ferro - All Models Excluding Truck Balancers

Norton - All Models

Snap-On - Shafts Must Be Verified 28mm

Sun - 1742 And 1762

36mm Shaft Models -

Accuturn - 6100, 6600, 6800

Cemb - Pre 1995 Models

Coseng - C301, C311, C322, C366

Launch - 402, 412

Ranger - All Models

40mm Shaft Models -

Accuturn - 1200, 1220, 1250, 1400, 1420, 1450, 1500, 1520, 1550, 1650, 1820, 1850 (5100, 5323, 5500, 5600 With Serial #s 51-0623 To 51-1457)

Bear - 80-100, 80-303

Beisbarth - All Models

Bosch - All Models

CEMB - All Models 1995 And Later, (Excluding Truck Models)

Coats - (Previously Upgraded to 40mm Shafts) 700, 800, 825, 850, 925, 950, 1000, 1025, 1050, 1055, 1250, IBS 2000 (Shaft Must Be Verified 40mm), 1750, 1800, 1850, 775, 875, 1175, 6275HS, XR Balancers

Corghi - All Models 2007 And Later

FMC - All Models

Hofmann - All Models

Hunter - All Models

John Bean - All Models

Kwikway - All Models

Launch - 408, 500

Snap-On - Shaft Must Be Verified 40mm

Sicam - All Models

Insights:

When selecting a cone, the range is determined by the center bore on the wheel you are trying to balance. For example, if your wheel center hole is 3" in diameter, make sure that 3" is within the range of the cone you are purchasing. ALL wheel balancers have one of four shaft diameters: 28mm, 36mm, 38mm, or 40mm. This determines the center bore of your cone for mounting on your machine. Use the above machine information for selecting the correct size.

This set will cover car to light truck vehicle sizes

Made in the U.S.A.